ITB Journal of Science Volume 43 A, Number 2, July 2011 | Perpustakaan Universitas Bhayangakara Jakarta Raya
Advanced SearchITB Journal of Science Volume 43 A, Number 2, July 2011
Informasi Detil
| Volume |
Volume 43 A, Number 2, July 2011
|
|---|---|
| Penerbit | The Institute for Research and Community Services Institute Technology Bandung : Bandung., 2011 |
| ISSN |
1978-3043
|
| Subyek |
Artikel Jurnal
| Judul | Abstract | Halaman |
|---|---|---|
| Trajectory Following Method on Output Regulation of Affine Nonlinear Control Systems with Relative Degree not Well Defined | The problem of output regulation of affine nonlinear systems with the relative degree not well defined by modified steepest descent control is studied. The modified steepest descent control is a dynamic feedback control which is generated by the trajectory following method. By assuming the system is minimum phase, output of the system can be regulated globally asymptotically. | 73-86 |
| Production of Ethanol from Cocoa Pod Hydrolysate | Cocoa pod (Theobroma cacao L.) hydrolysate was hydrolyzed into glucose using hydrochloric, sulphuric and nitric acids, respectively. The concentration of each acid was set at 0.25 M, 0.50 M, 0.75 M, 1.00 M and 1.25 M. They were treated under two different temperatures and time at 75¢ªC and 90¢ªC for 2 h and 4 h, respectively. The results showed that hydrolysis in 1.00 M of hydrochloric acid at 75¢ªC for 4 h had produced the highest glucose content of 30.7% w/v compared to all others acids treated under similar conditions. The pod¡¯s hydolysate was then fermented in batch culture using Saccharomyces cerevisiae for 48 h at 30¢ªC. A maximum ethanol production of 17.3%v/v was achieved after 26 h of fermentation time. | 87-94 |
| Synthesis and Biological Activity of Novel Platencin Derivatives | The biological mode of action of platencin, a potential lead molecule for a new class of antibiotics, is detailed. Furthermore, enantiopure syntheses of several platencin derivatives are described, of which the core structure can be accessed in two exceedingly simple steps from commercially available starting materials. Furthermore, the antibiotic properties of the derivatives was evaluated. | 95-112 |
| Immobilization of Amino Acids Leucine and Glycine on Polypyrrole for Biosensor Applications: A Density Functional Theory Study | Adsorption based on the immobilization of amino acids, i.e. leucine and glycine, on the surface of undoped polypyrrole (Ppy) is investigated. Calculations are done based on density functional theory using Gaussian03 software and applying GGA with 6-31G(d) basis set and exchange-correlation model of PBE (Perdew, Burke, Ernzerhof) level of theory. The energy of the Ppy doped with amino acids are minimized with respect to the orientation and distance of the amino acids to the Ppy. Neutral leucine carboxyl shows greater binding energy as compared to that other leucine configurations. It has adsorption energy of 0.25 eV at optimum distance of 2.2 Å from the surface of Ppy. As for the glycine, the zwitterionic carboxyl exhibits the strongest binding energy among other glycine configurations. It has adsorption energy of 0.76 eV at optimum distance of 1.7 Å from the surface of Ppy. The adsorption processes for both amino acids should proceed easily because the activation barriers are either absent or very small. | 113-122 |
| Effect of Aluminium Content in Aluminium Pillared Montmorillonite on Its Surface Acidity Properties | Aluminium pillared montmorillonites from Indonesian natural montmorillonite has been prepared using Al13 Keggin ion pillaring precursor in varied concentrations. Herein we studied their characterization and catalysis application for esterification reaction. X-ray diffraction (XRD), energy dispersive x-ray analysis (EDX), and BET gas sorption analysis were employed to characterize the prepared materials besides the characterization on surface acidity by pyridine and n-butylammine adsorptions and FTIR analysis. The result showed that significant improvement on physicochemical character data was obtained by a pillarization process. Such a process also provided improvements on catalytic activities in esterification reactions. The effect of aluminium content on material characters was discussed in this paper. It was observed from the catalytic activity tests that pillared montmorillonite samples demonstrated higher activity in esterification reaction relative to the raw montmorillonite. It was found that surface profile of materials consist of specific surface area, pore volume and Lewis acidity were significantly affect the catalyst activity. | 123-138 |
| Five Layers Aurivillius Phases Pb2-xBi4+xTi5-xMnxO18: Synthesis, Structure, Relaxor Ferroelectric and Magnetic Properties | Synthesis of five layers Aurivillius phases, Pb2-xBi4+xTi5-xMnxO18 (0 „T x „T 1) were carried out by molten salts method using eutectic mixture of Na2SO4/K2SO4 salts (1:1 molar ratio) as the flux. The samples were characterized by X-ray diffraction powder and refined by Le Bail technique. The refinement results revealed that the samples with composition x = 0, 0.2, 0.4, and 0.6 formed five layers Aurivillius with the space group B2cb; however, the samples with x = 0.4 and 0.6 contained impurity as BiMnO3 and the additional phase of four layers Aurivillius (PbBi4Ti4O15) was also observed for x = 0.6. The samples with x = 0.8 and 1 resulted in two phases: four layers Aurivillius and BiMnO3. The dielectric properties of the Pb2-xBi4+xTi5-xMnxO18 show broad peaks with the temperature of the maximum of the dielectric constant (Tm) at temperature of 295, 295, 304, and 343„aC at a frequency of 2 MHz for x = 0, 0.2, 0.4, and 0.6, respectively. The Tm of these samples is shift to the left with decreasing frequency as indication of relaxor ferroelectric behavior. The samples with x = 0.8 and 1 show anomaly at 514„aC and 551„aC which correspond to the transition phase of four layers Aurivillius. Magnetic properties for all samples containing Mn are paramagnetic. | 139-150 |